FAQ
1. What do I need to do before using my grinder for the first time?
Your new grinder is ready to use straight from the box. Adjust the grind setting and enjoy!
The more you grind, the better you’ll know your grinder.
2. How do I adjust the grind settings of the grinder?
External Numerical Adjustment Ring
Turn the adjustment dial to adjust the grind setting, it’s just like the electric grinder. The higher the number, the coarser the grind.
3. How to clean and maintain my grinder?
DACLL grinders are able to be dismantled without any tools and allow thorough cleanliness and maintenance lacking the need to re-calibrate the burr.
The grinder can be clean with a dry brush and an air blower, Do not clean the grinder with water.
Disassemble the grinder and clean it thoroughly once a month. It would maintain the grinding results and life-time of the grinder.
4. How can I remove odor and coffee oils from the grinder?
Simply grind rolled oats or instant oats, wipe with a damp (not wet) towel, and dry immediately. Excessive moisture will damage the grinder.
5. Is my grinder applicable to an electric screwdriver/drill?
The 6.35mm electronic screwdriver/drill is applicable to all the DACLL grinders and it doesn’t need to be a powerful one.
We suggest using a drill for one or two cups within a short period of time, or it could get hot and affect the taste.
6. Grinds are sticking to the inner side of the catch cup and the internal adjustment dial. How do I fix this?
Spray some water on the beans to eliminate static.
Notes: Excessive moisture will damage the grinder, so be sure to store the grinder at a dry location.
7. How long is the lifetime of my grinder? Can I replace the spare parts?
The burr in the grinders were calibrated by our team to ensure maximum stability over time, and it is expected to grind up to 100~200 kg beans.Any spare parts can be purchased through the DACLL website or contact customer service via email directly:direct@dacll.com